Freestanding Louvered Pergola with 4 Solar powered Screens
Turnkey Project · Whittier, Los Angeles County

Freestanding Louvered Pergola with 4 Solar powered Screens

Rinova installed a freestanding 10' × 13' Venta motorized louvered pergola in anthracite in Whittier, CA, over an uneven paver patio laid on sand.

LocationWhittier, Los Angeles County
SystemVenta motorized louvered aluminum pergola
SKUVLR10X13RAL7016FS
Delivered asTurnkey Project · design to install

Project photos

Freestanding Louvered Pergola with 4 Solar powered Screens – photo 1

Quick answer: Rinova installed a freestanding 10' × 13' Venta motorized louvered pergola in anthracite in Whittier, CA, over an uneven paver patio laid on sand. Our crew leveled the patio, poured 4 concrete footings under the pavers, and added solar-powered screens on all 4 sides, an infrared heater and a ceiling fan. The project took 2 days.

Project at a glance

Location Whittier, Los Angeles County, CA
Product Venta motorized louvered aluminum pergola
Size 10' × 13'
Finish Anthracite (RAL 7016)
Mounting Freestanding
Main challenge An uneven paver patio on a sand base
Foundation 4 new concrete footings poured under the pavers; pavers reset on top
Anchoring Three 1-foot Hilti steel screw anchors per post through the pavers into the footings (12 in total)
Electrical Hardwired, with every cable concealed inside the beams and posts
Features & add-ons Remote-controlled motorized louvers, infrared heater, ceiling fan, solar-powered motorized screens on all 4 sides
Installation time 2 days
Delivered as Turnkey Project: design, engineering, permits, footings and installation by Rinova Pergola

The challenge: an uneven paver patio on a sand base

The existing patio was pavers laid over a sand base, and the surface was uneven. Sand alone cannot hold a pergola post securely, and an uneven surface would leave the structure out of level.

Our solution

Our crew leveled the patio first. We then removed the pavers at each post location, poured 4 new concrete footings underneath, and reset the pavers on top of the concrete for a clean, even finish.

The motorized louvers adjust by remote control for the exact amount of shade. The system also includes an infrared heater, a ceiling fan, and solar-powered motorized screens on all 4 sides. Each screen has a built-in battery that handles about 60 open-and-close cycles on a single charge.

Installation details

  • Foundation: 4 new concrete footings poured under the pavers; pavers reset on top
  • Anchoring: Three 1-foot Hilti steel screw anchors per post through the pavers into the footings (12 in total)
  • Electrical: Hardwired, with every cable concealed inside the beams and posts
  • Installation time: 2 days

Products used in this project

Planning a similar project in Whittier? Read our Whittier pergola guide, browse all Rinova projects, or get a free quote.

Frequently asked questions about this project

How long did this pergola installation take?

The installation in Whittier was completed in 2 days, including leveling the patio and pouring 4 new concrete footings.

Can a pergola be installed on pavers laid over sand?

Yes, but not on the sand itself. We removed the pavers at each post location, poured a concrete footing under each post, and reset the pavers on top. Each post is then anchored into its footing with three 1-foot Hilti steel screw anchors.

Do solar-powered pergola screens need wiring?

No. Each solar screen has a built-in battery that handles about 60 open-and-close cycles on a single charge, so no wiring is needed for the screens.

Is the wiring visible on this pergola?

No. All electrical is hardwired, with every cable concealed inside the beams and posts.

What features does this Whittier pergola include?

Remote-controlled motorized louvers, an infrared heater, a ceiling fan, and solar-powered motorized screens on all 4 sides.

Turnkey Project

Your pergola, delivered as a Turnkey Project

The project above was designed, engineered, permitted and installed by Rinova's own licensed crew. Yours can be too — one company, one contract, one crew, from the first sketch to the final walkthrough.

  1. Consultation & designFree consultation at our Santa Ana showroom or at your home. We measure, recommend the right system and size, and give you one fixed Turnkey Project quote.
  2. Engineered drawingsPE-stamped, permit-ready engineered drawings sized to your site, wind exposure and footing conditions.
  3. City permits & HOAWe pull the city permit and prepare HOA submittals for you, as part of every Turnkey Project.
  4. Footings, concrete & electricalOur own crew pours engineered footings and runs the electrical for motorized louvers, lighting and screens.
  5. Professional installationInstalled by Rinova's licensed team, not a subcontractor. One company sells, builds and stands behind it (CSLB #1116353).
  6. Warranty & supportLifetime warranty on the aluminum structure and paint, 10 years on moving parts, 5 years on motors and electrical.
Start my Turnkey Project Financing: $0 down Financing available on every Turnkey Project · $0 down · fixed rates from 7.80%
Financing available

Finance your Turnkey Project with $0 down

  • $0 down
  • Fixed rates from 7.80% (8.08% APR)
  • Terms up to 30 years
  • No home equity needed
  • 60-second soft check · no credit impact

A $10,000 Turnkey Project is about$82/month*on a 20-year fixed term

*Example at 7.80% fixed (8.08% APR), 240 months. Loans are provided by HFS Financial, subject to credit approval; rates and terms are set by HFS and may change. Rinova Pergola is not a lender.